This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

New AP´s not communicating with UTM

Hi all, 

we have a Customer-WLAN with an pfSense connected to a dedicated SOPHOS UTM (430) LAN-Port.

pfSense is serving DHCP for the Network including Option 234 pointing to the Sophos. So far so good, until now all stuff is working.

Whats odd here is: 


When i try to add a NEW AP (AP55 e.g.) it gets a DHCP-Address and starts to send TCP Port 2712 to the UTM (IP 1.2.3.4 and the IP from the DHCP-Option 234).
BUT these packets do not reach the UTM. (Packets say: 0 bit, Retransmission ... ) 

all other existing APs already in the Network can communicate with the UTM (Port 2712) and  work as they are expected to do, so the FW-Rules and so on are OK, as these units wouldnt do so if not.

I even tried opening pfSenses and UTMs FW with an any-any-any rule on the specific LAN-ports -> same result 

Any ideas what this could be ?

PS: connecting the new APs to the "normal" user-VLAN on the UTM makes them visible immediately in the Wireless-Protection -> AccessPoints list

Kind regards, 

Markus  



This thread was automatically locked due to age.