I have an SG115 with an AP15 that I believe may be impacted by the bug that's in the reported list of fixes for 9.703 - "NUTM-10269 [Wireless] SSID stops broadcasting"
I was previously running 9.702. Due to the necessity of working from home, I've been using my wireless network quite extensively. A few times (not regularly, but enough to really cause problems during my work day) the wireless network will randomly stop broadcasting. All wireless devices simultaneously lose their connection. I login to the WebAdmin and don't see anything obvious that's wrong aside from the loss of wireless clients on the Wireless Protection section. Eventually all wireless clients drop from that list. The fix was always to pull the plug on the AP15.
I looked online and saw there was a soft release for 9.703 which had listed "NUTM-10269 [Wireless] SSID stops broadcasting" as a fix. I thought "Great! Known problem and this should fix it". I downloaded and installed 9.703 over a weekend and went from there. The next Monday I'm working and again the exact same problem happens as I'm in the middle of a Zoom meeting (nice timing). I rebooted the AP15 and I was back in business within 5 mins. I would say this has been recurring on an almost daily basis ever since. Luckily I found instructions for SSH into the SG115 and using "awetool" to remotely reboot the access point, which has saved me from quite a few trips down the couple levels of my house to where the AP15 is located.
I'm attaching a copy of my log file (scrubbed to protect the innocent...me) from Monday 4/20, which was especially problematic...I rebooted the AP15 either 2 or 3 times on this day. I did note that it was rebooted at 3:42 PM on this particular day right after the wireless network went down. Hopefully this is of use to someone.
wireless-2020-04-20(Scrubbed).log
This thread was automatically locked due to age.