Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 4 subscribers
  • Views 7909 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Web Protection Decrypt and Scan break VPN Connection

Sally

Hello,

 

I have my Open VPN Client configured Router in a DMZ, and route all traffic from LAN over this Tunnel. 

 

I have the setting Web Filtering - HTTPS - URL filtering only, this works.

 

When I change the setting to Decrypt and Scan, the VPN Tunnel disconnects, and the Open VPN Log on the Router show Client Wait , Reconnect , Tls Errror.

 

What do I have to configure, to use Decrypt and Scan setting ?

 

Thx



This thread was automatically locked due to age.
Parents
  • 0

    To elaborate on sachingurung's point, the two technologies are inherently incompatible, so you have to ensure that https inspection is off when VPN is on.   An exception for the VPN target server should allow https decrypt-and-scan to be enabled for everything else.

Reply
  • 0

    To elaborate on sachingurung's point, the two technologies are inherently incompatible, so you have to ensure that https inspection is off when VPN is on.   An exception for the VPN target server should allow https decrypt-and-scan to be enabled for everything else.

Children
No Data
Unfiltered HTML