This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Issue with authenticatin SSO tansparent mode with AD dont Authenticacion withe Sophos 9.409

azepeda1984 over 7 years ago

Good day

Problem with sophos utm 9409 when verifying the users do not find the users we tried with different bind dn and the same problem the server is windows 2008 R2 and we also tried with windows server 2012 R2 and the same problem attached catches the problem

bindn

CN=Administrador,CN=Users,DC=xx,DC=xx,DC=sv

This thread was automatically locked due to age.

Parents

0 x.cr3w over 7 years ago

Hey. are you sure your binddn is correct?

CN=Administrador,CN=Users,DC=xx,DC=xx,DC=sv

Is your Administratore Name correct? Default its "Administrator" and not "Administrador"

In the logfiles it looks good. Your AD Bind works, but your authentication test failed, because there is no group for this user found.

Please check under "Definitions and Users" on your utm, if there is a group called "Active Directory users". If not, create a new one with type Backend Membership pointing to your AD Server/s and repeat your test again.

greetings

Sophos Platinum Partner
Sophos Certified Architect
(Ceritfied UTM Architect / Certified XG Architect)
Cancel
Vote Up 0 Vote Down

Cancel
0 MichaelWalter over 7 years ago in reply to x.cr3w

i have the same issue on 3 different enviroments with Software Version of 9.409. On one Installation i have activate STAS, but on the other 2 not.

i changed same weeks ago a hardware cluster(a 4th enviroment) with a software version of 9.408 and i am not sure but i guess that there i doesnt get this failure.

Base DN is correct. The Bind DN Test works fine. The Problem is for both Active Directory Servers

And under Definitions&Users a group exists called "AD-users" with Backend Membership.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 MichaelWalter over 7 years ago in reply to x.cr3w

i have the same issue on 3 different enviroments with Software Version of 9.409. On one Installation i have activate STAS, but on the other 2 not.

i changed same weeks ago a hardware cluster(a 4th enviroment) with a software version of 9.408 and i am not sure but i guess that there i doesnt get this failure.

Base DN is correct. The Bind DN Test works fine. The Problem is for both Active Directory Servers

And under Definitions&Users a group exists called "AD-users" with Backend Membership.
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 MichaelWalter over 7 years ago in reply to MichaelWalter

i found same interesting Points:

i starting sniffering and found that the password is invalid because the sophos dont send a password:

if i try to proof the serversettings the password is sending and the ldap request is sucessful. i open a case so lets wait.
Cancel
Vote Up 0 Vote Down

Cancel
0 BAlfson over 7 years ago in reply to MichaelWalter

Michael, is your Backend Group based on a manually-created Security Group containing only user accounts in Active Directory?

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel
0 MichaelWalter over 7 years ago in reply to BAlfson

hi Bob,

yes, thats right.

michael
Cancel
Vote Up 0 Vote Down

Cancel
+1 MichaelWalter over 7 years ago in reply to MichaelWalter

it is a bug. update to version 9.411 and the problem was fixed
Cancel
Vote Up 0 Vote Down

Cancel