Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 9 replies
  • Answers 1 answer
  • Subscribers 3 subscribers
  • Views 12650 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Automatic proxy config very slow

Revan

Hello,

we recently changed our UTM from an ASG220 to a virtual appliance.

Almost everything is working as expected besides the automatic proxy configuration via wpad.

It works fine when i set the proxy manually in the browser.

When i change to wpad the browsers need about 20-30 seconds before they start to load a website.

Webfilter log doesn`t show anything blocked.

I tried to made the wpad available over an IIS or directly in the UTM, both variants showed the same delay before the websites began to load.

I can download the wpad file when i type the url in the adressfield of the browser.

How may i find out why the automatic proxy config doesn`t work as it should?



This thread was automatically locked due to age.
Parents
  • 0

    Hi Revan,

    Please share your PAC file contents with us.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson

    Good Morning,

    of course, here it is:

    function FindProxyForURL(url, host)
    {
        // If the requested website is hosted within the internal network, send direct.
        var resolved_ip = dnsResolve(host);
        if (isPlainHostName(host) ||
            shExpMatch(host, "*.local") ||
            isInNet(resolved_ip, "10.10.10.0", "255.255.255.0") ||
            isInNet(resolved_ip, "10.10.20.0", "255.255.255.0") ||
            isInNet(resolved_ip, "192.168.32.0", "255.255.255.0") ||
            isInNet(resolved_ip, "192.168.33.0", "255.255.255.0") ||
            isInNet(resolved_ip, "127.0.0.0", "255.255.255.0"))
            return "DIRECT";

       // Set the desired proxy server for local addresses
       if (isInNet(myIpAddress(), "10.10.10.0", "255.255.255.0"))
             {return "PROXY 10.10.0.10:8080" ;}
       if (isInNet(myIpAddress(), "10.10.20.0", "255.255.255.0"))
             {return "PROXY 10.10.0.10:8080" ;}
       if (isInNet(myIpAddress(), "192.168.32.0", "255.255.255.0"))
             {return "PROXY 10.10.0.10:8080" ;}
       if (isInNet(myIpAddress(), "192.168.33.0", "255.255.255.0"))
             {return "PROXY 10.10.0.10:8080" ;}
       if (isInNet(myIpAddress(), "192.168.198.0", "255.255.255.0"))
             {return "PROXY 10.10.0.10:8080" ;}
       if (isInNet(myIpAddress(), "192.168.200.0", "255.255.255.0"))
             {return "PROXY 10.10.0.10:8080" ;}

        // If the hostname matches or contains outlook.com or office 365.com, send direct.
        if (dnsDomainIs(host, ".outlook.com") ||
            dnsDomainIs(host, ".office365.com"))
            return "DIRECT";

       // For all other networks, set proxy
       return "PROXY 10.10.0.10:8080" ;
    }
  • 0 in reply to Revan

    Maybe I'm missing something, Revan, but doesn't the "// Set the desired proxy server for local addresses" section conflict with the first one?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson

    No, the dnsResolve(host) command describes the requested host while myIPAddress returns the source host.

    Besides that, this script worked before we migrated to the new vUTM.

  • 0 in reply to Revan

    Ah yes, I didn't read closely enough.  I can't see anything, Revan.  Please share with us what Sophos Support has to say.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0 in reply to Revan

    Ah yes, I didn't read closely enough.  I can't see anything, Revan.  Please share with us what Sophos Support has to say.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
Unfiltered HTML