Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 17 replies
  • Subscribers 1 subscriber
  • Views 41573 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Web Filtering Log Showing AD Username instead of IP adress

ken.aquino
Hi Guys,

Good day,

Is it possible that the Web Filtering Log/Report shows the AD Username instead of the IP address? [:)]

We are using SG650 and currently has integration with our AD.

Thanks [:D]


This thread was automatically locked due to age.
Parents
  • 0
    Transparent requires no changes to the client browser.  Standard requires that proxy information be set in the client browser (default is port 8080).  Standard tends to be less problematic, being a mature technology, and can provide for more granular control of proxy bypass via WPAD.dat/proxy.PAC files.  There are technical differences in how authentication is achieved as well.  In a business environment, I prefer to use standard.
    __________________
    ACE v8/SCA v9.3

    ...still have a v5 install disk in a box somewhere.

    http://xkcd.com
    http://www.tedgoff.com/mb
    http://www.projectcartoon.com/cartoon/1
Reply
  • 0
    Transparent requires no changes to the client browser.  Standard requires that proxy information be set in the client browser (default is port 8080).  Standard tends to be less problematic, being a mature technology, and can provide for more granular control of proxy bypass via WPAD.dat/proxy.PAC files.  There are technical differences in how authentication is achieved as well.  In a business environment, I prefer to use standard.
    __________________
    ACE v8/SCA v9.3

    ...still have a v5 install disk in a box somewhere.

    http://xkcd.com
    http://www.tedgoff.com/mb
    http://www.projectcartoon.com/cartoon/1
Children
No Data
Unfiltered HTML