Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 1 subscriber
  • Views 5047 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Web Filtering in Bridge mode with authentication

adiomin
Hi All.

I stuck setting up my UTM. The goal is to have in-line Web Filtering with authentication. Similar to what Barracuda Web Filter has.

My network is:
 --  -- 
On the Bridge Interface Default GW is set to router IP (10.0.0.1)

Web Filter is in Full Transparent mode. Default Authentication: Browser.
Allowed Networks: Any
Firewall Rule Any-Any-Allow active

IE or Firefox getting connection timeout. Without asking my Username/Password

Any help appreciated.


This thread was automatically locked due to age.
Parents
  • 0
    I think that that's your problem.  WebAdmin automatically creates routes based on those settings.  You should be able to access WebAdmin at 10.0.0.53 and disable the Management interface.  Do things work correctly with it off?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    I think that that's your problem.  WebAdmin automatically creates routes based on those settings.  You should be able to access WebAdmin at 10.0.0.53 and disable the Management interface.  Do things work correctly with it off?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
Unfiltered HTML