Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 1 subscriber
  • Views 5050 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Web Filtering in Bridge mode with authentication

adiomin
Hi All.

I stuck setting up my UTM. The goal is to have in-line Web Filtering with authentication. Similar to what Barracuda Web Filter has.

My network is:
 --  -- 
On the Bridge Interface Default GW is set to router IP (10.0.0.1)

Web Filter is in Full Transparent mode. Default Authentication: Browser.
Allowed Networks: Any
Firewall Rule Any-Any-Allow active

IE or Firefox getting connection timeout. Without asking my Username/Password

Any help appreciated.


This thread was automatically locked due to age.
Parents
  • 0
    Management Interface eth0: 10.0.0.52/24 

    Bridge br0: 10.0.0.53/24

    Is that a typo, or do you really have two interfaces defined with the 10.0.0.0/24 subnet?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    Management Interface eth0: 10.0.0.52/24 

    Bridge br0: 10.0.0.53/24

    Is that a typo, or do you really have two interfaces defined with the 10.0.0.0/24 subnet?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
Unfiltered HTML