This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Allow Service to Single Server

Hi,

I have been adding Target Services to allow clients to connect to various internal servers on non-standard ports.

Rather than opening the service up entirely though, I would really rather just allow access to that particular server - i.e. open port 8443 solely for connections to an internally hosted DVR and nowhere else.

What is this best way of doing this?

Regards

Boris


This thread was automatically locked due to age.
Parents
  • In Standard mode, I would recommend bypassing the proxy for devices in the same Ethernet segment.  Then, you can use the firewall in the webserver to do what you want.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • In Standard mode, I would recommend bypassing the proxy for devices in the same Ethernet segment.  Then, you can use the firewall in the webserver to do what you want.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data