Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 1 subscriber
  • Views 9960 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Crossdomain Access Denied

rsenio
I've got an issue with a few sites. I'll place an example here. Proxy is setup as a standard proxy, wpad/pac file from the UTM, Active Directory Auth, DHCP option 252. A second transparent proxy is second on the list for those guests that get DHCP from a guest wifi router, no Auth, and no option 252.

If I visit Rogers Place – Live View – Concourse Camera using the standard proxy, I get "Cannot load m3u8. Crossdomain access denied"

If I hook up to the guest wifi, and surf through the transparent proxy it works.

In my auto config I've tried 
if (shExpMatch(url, "http://*rogersplace.com/*")) return "DIRECT";

But the traffic still appears in my log. And I've also tried an exception (filtering options-exceptions) selecting all the options. Still not working, same error. What's going on?

I have also noticed that the download manager for Solidworks didn't work as well. I tried the same exception in the wpad/pac file, but it didn't work until I made an exception (filtering options-exceptions)

When traffic is DIRECT, it should bypass the proxy all together no?


This thread was automatically locked due to age.
Parents
  • 0
    If the accesses to solidworks are supposed to bypass the proxy, I would remove the Exceptions for it just to keep the configuration clean.

    I don't know why it didn't work, but it obviously didn't because your browser sent the request to the Proxy instead of Direct.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    If the accesses to solidworks are supposed to bypass the proxy, I would remove the Exceptions for it just to keep the configuration clean.

    I don't know why it didn't work, but it obviously didn't because your browser sent the request to the Proxy instead of Direct.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
  • 0 in reply to BAlfson
    If the accesses to solidworks are supposed to bypass the proxy, I would remove the Exceptions for it just to keep the configuration clean.

    I don't know why it didn't work, but it obviously didn't because your browser sent the request to the Proxy instead of Direct.

    Cheers - Bob


    Lol, what I am saying is that without the exception it does not work. Solidworks has it's own download manager, it doesn't use the browser to download updates. I would have assumed that with the wildcard address set to direct that the application would pass through the proxy without issue.

    So what I have is correct for bypassing?
    if (shExpMatch(url, "http://*solidworks.com/*")) return "DIRECT";
Unfiltered HTML