Web Filtering assigned to a specific Host (range Ip)

Question

XG 125 - UTM 9.0 (Firmware version: 9.510-5) 
 Goodmorning everyone, I'm trying to set up different profiles to be applied to different Ip ranges within the same network. I have an "Internal Lan" with Ip 192.168.0.0/24 and I would like an Address Range (192.168.0.30-150) to have some blocking rules, while other ranges have different Web Filtering Profiles. The problem is that I can not identify a field in which to associate the Filtering Profiles with the Ip Range. Thank you!

DKKDG · Answer

Hi Dario, 
 in some modules configuration slots of the utm you cannot use the range object definition. The allowed networks in the web protection is one of them. 
 The only option you have is to create a network group with the desired subnets and host definitions to use a "range" in your web protection. 
 Best Regards DKKDG

DouglasFoster · Answer

You just need to populate the Allowed Networks list of the "restrictive" Filter Profile with network objects that match your requirements. For x.x.x.30-150, you need 
 x.x.x.30/31 
 x.x.x.32/27 
 x.x.x.64/26 
 x.x.x.128/31 
 x.x.x.130/32 (or as a host entry) 
 Then ensure that the "restrictive" profile takes precedence over the relaxed profile. 
 Because it is secondary, the relaxed profile can be inclusive of the other address range, so this specification will work, as Bob Alfson already indicated: x.x.x.0/24