This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM Confusion

Hi..

this is second post previous post no one reply. my confusion is Firewall rule vs filter policy.

fw rule and filter policy must be in same pattern ? i mean if i have default policy,on filter policy it should be on first ?? is there any link between these two pattern.

 

filter policy like work order base, deny on first, second limited access. But the order also should be match firewall policy in number category.

 

thanks 



This thread was automatically locked due to age.
Parents
  • Hi ferosyed,

    Rules are on the Firewall side and are separate to Filter rules, are for web filtering only.

    Web Filter uses the standard ports (80, 443 etc) or, anything noted in Web Protection --> Filtering Options --> Misc --> Allowed Target Services.

    these are used by the (web) Proxy service to allow or deny access to websites (or filter)

    XG & UTM Architect (Systems: XG v18 & UTM 9.7 - Virtual, HW & SW)
    Curious enough to take it apart, skilled enough to put it back together, Clever enough to hide the extra parts when I'm Done!

  • understood. is there any way to set two different time set for single policy. i mean work time policy from 8 to 12 and 13 to 17. i  can do this on xg but on utm i can define only one set time.

  • I would create another schedule that uses both the time frames or create another web filter policy.

    XG & UTM Architect (Systems: XG v18 & UTM 9.7 - Virtual, HW & SW)
    Curious enough to take it apart, skilled enough to put it back together, Clever enough to hide the extra parts when I'm Done!

Reply
  • I would create another schedule that uses both the time frames or create another web filter policy.

    XG & UTM Architect (Systems: XG v18 & UTM 9.7 - Virtual, HW & SW)
    Curious enough to take it apart, skilled enough to put it back together, Clever enough to hide the extra parts when I'm Done!

Children
No Data