Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 3 subscribers
  • Views 11229 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Update UTM 9.500-9 - 9.501-5 no vpn access l2tp using radius server

dave m1

Hello,

we updated from above Version and now we do not have Access via l2tp vpn using 2012r2 radius service

Is there a Workaround?



This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to dave m1

    Hi, Dave, and welcome to the UTM Community!

    In the UTM, it's not best practice to assign IPs in the range of your LANs to L2TP/IPsec clients as it's easy to create routing problems with that configuration.  I suggest that you use the standard "VPN Pool (L2TP)" object instead of DHCP from your 2012r2 server.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson

    Hello Bob,

     

    yes to get a quick functionally vpn running I created a new VPN Pool Network which has nearly same range like our lan to get Connection to all Services and Servers.

    Our DHCP Connection configured in Remote L2TP IPSEC  does not work since Firmware update which also gets this ip range.

     

    I tried to open a sophos case for this new problem but we have no premium Support. 

  • 0 in reply to dave m1

    Since Tuesday there is a new UTM Firmware Version which should solve this Problem 9.502

Unfiltered HTML