Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 1 subscriber
  • Views 15878 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ASTARO to CISCO GRE tunnel

mircevski
Hi,

I'm trying to build a vpn tunnel ASTARO to CISCO. I did the following:

ASTARO side:
iptunnel add tun0 mode gre remote xx.xx.xx.xx  local yy.yy.yy.yy ttl 255
ifconfig tun0 inet 172.16.8.2 netmask 255.255.255.0
ifconfig tun0 up

CISCO side:
interface Tunnel0
 ip address 172.16.8.1 255.255.255.0
 tunnel source xx.xx.xx.xx
 tunnel destination yy.yy.yy.yy

It should be as simple as this, but it doesn't work.

Has anyone done this?

Thanks


This thread was automatically locked due to age.
Parents
  • 0
    AH, GRE - I didn't even see that.  I wonder if you could use the "DSL (PPPOA/PPTP)" Interface type to accomplish what you want.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    AH, GRE - I didn't even see that.  I wonder if you could use the "DSL (PPPOA/PPTP)" Interface type to accomplish what you want.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML