This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ASTARO to CISCO GRE tunnel

Hi,

I'm trying to build a vpn tunnel ASTARO to CISCO. I did the following:

ASTARO side:
iptunnel add tun0 mode gre remote xx.xx.xx.xx  local yy.yy.yy.yy ttl 255
ifconfig tun0 inet 172.16.8.2 netmask 255.255.255.0
ifconfig tun0 up

CISCO side:
interface Tunnel0
 ip address 172.16.8.1 255.255.255.0
 tunnel source xx.xx.xx.xx
 tunnel destination yy.yy.yy.yy

It should be as simple as this, but it doesn't work.

Has anyone done this?

Thanks


This thread was automatically locked due to age.
Parents
  • Hi, mircevski, and welcome to the User BB!

    Is there a reason you don't do the Astaro side in WebAdmin?  I guess you could look in the Firewall Live Log to see which packets are being blocked.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • Hi, mircevski, and welcome to the User BB!

    Is there a reason you don't do the Astaro side in WebAdmin?  I guess you could look in the Firewall Live Log to see which packets are being blocked.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data