This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IPSEC VPN - Do i need to add a route?

Hey Guys,

Sorry for my Newbism.

I have setup an IPSEC VPN between an ASG (8.001) and a Billion 7404VGO. The tunnel is up but I can't seem to route any traffic between the two networks.

Do I need to manually add some routes to both the ASG & Billion? I thought that as long as the tunnel came up the routing would be automatic? I cant ping any remote addresses from the ASG itself.

If anyone has advice I'd appreciate it.

Cheers

This thread was automatically locked due to age.

Parents

0 BAlfson over 13 years ago

Please show the lines from the full PF log. The live log doesn't give much information.

Pinging is not controlled with Packet Filter rules, rather by settings on the 'ICMP'tab of 'Network Security >> Packet Filter'.

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 BAlfson over 13 years ago

Please show the lines from the full PF log. The live log doesn't give much information.

Pinging is not controlled with Packet Filter rules, rather by settings on the 'ICMP'tab of 'Network Security >> Packet Filter'.

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data