This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IPSEC VPN - Do i need to add a route?

Hey Guys,

Sorry for my Newbism.

I have setup an IPSEC VPN between an ASG (8.001) and a Billion 7404VGO. The tunnel is up but I can't seem to route any traffic between the two networks.

Do I need to manually add some routes to both the ASG & Billion? I thought that as long as the tunnel came up the routing would be automatic? I cant ping any remote addresses from the ASG itself.

If anyone has advice I'd appreciate it.

Cheers

This thread was automatically locked due to age.

Parents

0 BAlfson over 13 years ago

Hi, Rols, and welcome to the User BB!

You shouldn't have that in the PF log. Please show pics of the 'IPsec Connection' and the 'Remote Gateway' definition. Also, a pic of the 'Site-to-site VPN tunnel status'.

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 BAlfson over 13 years ago

Hi, Rols, and welcome to the User BB!

You shouldn't have that in the PF log. Please show pics of the 'IPsec Connection' and the 'Remote Gateway' definition. Also, a pic of the 'Site-to-site VPN tunnel status'.

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data