Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 14 replies
  • Subscribers 1 subscriber
  • Views 1286 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cisco VPN to 3 Networks

unst
Hi all,
today i activated the Cisco VPN and after i removed the domain name unter RemoteAccess -> Advanced it worked well.
But when i put more than 1 "local network" in the box on the configuraiton site i can only access the very first network.

i tested it. it always just set the route to the first network.
have a look at the screens please.

do you know how i can tell the client or the asg to set routes to all networks?
thanks!


This thread was automatically locked due to age.
Parents
  • 0
    i am not able to add a network group to the "local networks" box on the cisco-vpn site.

    Interesting!  I can't find the thread I remembered, so it must have been about something else.

    d12fk, is there a technical reason that it's not possible to use network groups in 'Local networks' of the Cisco configuration?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    i am not able to add a network group to the "local networks" box on the cisco-vpn site.

    Interesting!  I can't find the thread I remembered, so it must have been about something else.

    d12fk, is there a technical reason that it's not possible to use network groups in 'Local networks' of the Cisco configuration?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
Unfiltered HTML