Dears,
first, friendly Hello to the community (and please excuse my bad english :-) )
Brand new user, I started with a ASG120 in the following configuration:
en0 = WAN
en1 = Network internal x.x.1.0/24
en2 = Network communications x.x.2.0/24
en3 = Network special guests x.x.3.0/24
I do local authentication of the users.
I want to use SSL VPN for remote access.
The simple way is up and running (Network en1, accepted User1)
But I have to route the VPN´s access:
- User1 -- SSL VPN -- internal
- User2 -- SSL VPN -- communications
- User3 -- SSL VPN -- communications
Depending on the remote user, the destination network must be different.
IP`s can be taken either from the predefined IP Pool or a DHCP Server in "internal" or an other one in "communications".
Is it possible to specify this User-depening-VPN-access?
This thread was automatically locked due to age.