Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 4 subscribers
  • Views 3624 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SSL VPN Remote Access - No Remote Access in User Portal

Jay_the_Admin

Product -> UTM SG210 version 9.711-5

Switched from AD-Groups to Radius Backend Authentication so we can use Microsoft MFA to login via SSL VPN.

Now VPN Access still works and my Users can access.

MFA is also being accepted. So far so good.

But if I want to Download the VPN Packages or Config in the User Portal, I can´t because "Remote Access" is missing.

I can´t be constantly giving my Users the packages manually.

Is there any Solution to this problem?

Kind Regards

Jacob



This thread was automatically locked due to age.
Parents
  • 0

    Did you check to make sure it is not disabled for the User Portal?  I have the same version UTM and mine is visible.

    Uncheck the box if it is checked:

    OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
    (Former Sophos UTM Veteran, Former XG Rookie)

Reply
  • 0

    Did you check to make sure it is not disabled for the User Portal?  I have the same version UTM and mine is visible.

    Uncheck the box if it is checked:

    OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
    (Former Sophos UTM Veteran, Former XG Rookie)

Children
Unfiltered HTML