Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 3 subscribers
  • Views 1824 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Two interfaces with different networks on UTM

PADDY27

Hi,

I have two local interfaces enabled.

Interface 0 WAN

Interface 1 192.168.10.1

Interface 2 192.168.40.1

I am connected to VPN I want to remote into 40.x devices  but I dont seem to be able to ping 40.x network at all. I can communicate with 10.x network from outside of the office.

What would be the issue?



This thread was automatically locked due to age.
Parents
  • 0

    A default installation creates an SNAT for Internal Network.  You may need one for the second interface.  Just a guess, as I have never had this type of setup before, but that was the very first thing that popped in my head.

    OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
    (Former Sophos UTM Veteran, Former XG Rookie)

Reply
  • 0

    A default installation creates an SNAT for Internal Network.  You may need one for the second interface.  Just a guess, as I have never had this type of setup before, but that was the very first thing that popped in my head.

    OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
    (Former Sophos UTM Veteran, Former XG Rookie)

Children
No Data
Unfiltered HTML