This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos UTM9 L2TP/Ipsec vpn connection problem with Windows 10 built-in client

Hi,

I'm new here and have the following problem.

I have checked it with Pre-shared key and also with certificate. The same results.

Does anyone has Info?

Thanks in Advance!



This thread was automatically locked due to age.
Parents
  • Hallo Avraam and welcome to the UTM Community!

    Pictures are very helpful here when it's of the Edit of a configuration item.  In the case of logs, it's better to copy and paste here from the log.  If you prefer, obfuscate IPs like 84.XX.YY.121, 10.X.Y.100, 192.168.X.200 and 172.2X.Y.51.  That lets us see immediately which IPs are local and which are identical or just in the same subnet.  In this case, there's not enough information to help you until we see the results of what Harsh has asked for.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • Hi again,

    There are 2 different public IP Addresses.

  • "no connection has been authorized with policy=PSK"

    Please show a picture of the 'Main Settings' in the UTM for 'L2TP over IPsec' remote access.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • Hi Bob,

    Thanks for your support.

    I have configured the local authentication and the pre-shared key.

    #L2TP

    #Firewall_Config

    #SNAT

Reply Children
No Data