How to configure ssl-vpn to send all traffic through vpn tunnel ?

Hi innov,

if you want that all traffic goes to the vpn tunnel you have to set "any" as local network in the profile.

But you cannot catch all the traffic from the client.
The network where the client is located will never be send through the tunnel.

For example:
Client network: 192.168.0.0/24
This network never goes trough the tunnel because this the clients local network.

All other network request goes through the tunnel.

Best Regards
DKKDG

Hi DKKDG,

Thankyou for your answer. To be more specific should I do it under Remote Access->SSL->New Remote Access Profile and under Local Network should I use any ?

Is that correct?

Kind Regards

innov

That's correct

Best Regards
DKKDG

DKKDG's solution will work.  I usually prefer to use the "Internet" object and whichever local resources should be available.

Cheers - Bob