Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 3 subscribers
  • Views 10335 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RED con 2 UTMs y 2 Wanes en cada lado

ManuelGutierrez

Hola,

     Tengo 2 UTMs unidos por RED, en la actualidad, en la parte servidora tengo dos WANES y tengo duplicidad en la parte cliente, configurando la IP por donde tiene que ver al servidor. Hemos montado otra WAN en la parte cliente, para no depender de un operador, y las tengo configuradas como balanceadas, pero al intentar configurar la duplicidad por la segunda WAN no tengo opción de especificarlo, y lo hace sobre la primera, con lo que tengo dos veces el mismo tunel.



This thread was automatically locked due to age.
Parents
  • 0

    RED with 2 UTMs and 2 WANs on each side

    Hola Manuel - welcome to the UTM Community! ([Google]: bienvenido a la Comunidad UTM!)

    Instead of posting translations from Google Translate, I believe that people should feel free to post in their native language if not comfortable with their English.  Then so that everyone else doesn't have to use Google Translate if they don't speak your native tongue, do provide the translation from Google.  Below is the exchange that you and Manu just had. ([Google]: En lugar de publicar traducciones de Google Translate, creo que la gente debería sentirse libre de publicar en su idioma nativo si no se siente cómoda con su inglés. A continuación, para que todos los demás no tengan que usar Google Translate si no hablan su lengua materna, sí proporcionan la traducción de Google. Debajo está el intercambio que tú y Manu apenas tenían.)

    Cheers - Bob

    Manuel [Google]: I have 2 UTMs joined by RED, currently, in the server side I have two WANS and I have duplication in the client side, configuring the IP where it has to see the server. We have mounted another WAN in the client side, not to depend on an operator, and I have them configured as balanced, but when trying to configure duplicity for the second WAN I have no option to specify it, and it does on the first, with what I have Twice the same tunnel.

    Manu[Google]: That you can solver by a rule in Interfaces and Routing -> Interfaces -> Multipath-Rules. But I do not think you're going to solve your problem. Routing to the same server IP will not be possible by TWO tunnels at the same time.  Greetings from Germany.

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0

    RED with 2 UTMs and 2 WANs on each side

    Hola Manuel - welcome to the UTM Community! ([Google]: bienvenido a la Comunidad UTM!)

    Instead of posting translations from Google Translate, I believe that people should feel free to post in their native language if not comfortable with their English.  Then so that everyone else doesn't have to use Google Translate if they don't speak your native tongue, do provide the translation from Google.  Below is the exchange that you and Manu just had. ([Google]: En lugar de publicar traducciones de Google Translate, creo que la gente debería sentirse libre de publicar en su idioma nativo si no se siente cómoda con su inglés. A continuación, para que todos los demás no tengan que usar Google Translate si no hablan su lengua materna, sí proporcionan la traducción de Google. Debajo está el intercambio que tú y Manu apenas tenían.)

    Cheers - Bob

    Manuel [Google]: I have 2 UTMs joined by RED, currently, in the server side I have two WANS and I have duplication in the client side, configuring the IP where it has to see the server. We have mounted another WAN in the client side, not to depend on an operator, and I have them configured as balanced, but when trying to configure duplicity for the second WAN I have no option to specify it, and it does on the first, with what I have Twice the same tunnel.

    Manu[Google]: That you can solver by a rule in Interfaces and Routing -> Interfaces -> Multipath-Rules. But I do not think you're going to solve your problem. Routing to the same server IP will not be possible by TWO tunnels at the same time.  Greetings from Germany.

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML