This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SG 125 [9.307-6] doesn't connect to SUM 4.202009

Hi together,

just rolled out a new SG 125 box to a site and saw, that this boxed didn't connect to our SUM. 

The SUM Log @SG 125 says:

> 1 is not connected. Trying to connect
> Updating SUM IP address for path: acc/server1/server
> [1] Connecting to SUM (ip=, port=4433).
> [1] Using SUM SSL connection.
> [1] We are now connected (ip=, port=4433).  
> SUM ehlo notification from [1] 
> Found SUM version 4.202009. Treating it as release 4.2.
> Full SUM support is granted as the current SUM version isn't lower than the minimal required SUM version of: 4.2
> Using confd system_id as GUID.
> [1] Received 0 bytes (eof). 


There is a SUM v4.3 Betaversion out. Did anyone know, if it's possible to get a 9.3 UTM connected with that beta version?

Another question: How can i backup the configuration of the sum? 
As in whitepaper (2.1.1) shown, there is no menu-entry like Managemant > Backup/Restore > Backup/Restore

Thanks in advance.

Greets
Chris


This thread was automatically locked due to age.
Parents Reply Children
No Data