This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Data Disk is filling up

Hi all,

I have a ACC 2.100 installation running that claims Data disk is filling up at 76% now. It's stable at 76% and has been for 2 weeks.

ACC is installed in a VM with 10GB disk.

How do I troubleshoot my issue?

Thanks in advance!

This thread was automatically locked due to age.

Parents

0 megaposer over 14 years ago

Hello,

please have a look at the following post:

https://community.sophos.com/products/unified-threat-management/astaroorg/f/61/t/56813

The best solution: increase the size of your VM disk to at least 30 GB. The storage/data partition will get approximately 40% of the available hard disk space, but only if you exceed a certain threshold - so on 10 GB hard disks the majority of space will be used for fixed partition sizes of the rootfs and tmpfs.

If you want to connect more devices you will ultimately require more space anyway.

Regards
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 megaposer over 14 years ago

Hello,

please have a look at the following post:

https://community.sophos.com/products/unified-threat-management/astaroorg/f/61/t/56813

The best solution: increase the size of your VM disk to at least 30 GB. The storage/data partition will get approximately 40% of the available hard disk space, but only if you exceed a certain threshold - so on 10 GB hard disks the majority of space will be used for fixed partition sizes of the rootfs and tmpfs.

If you want to connect more devices you will ultimately require more space anyway.

Regards
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 aste over 14 years ago in reply to megaposer

Hi megaposer,

I'll try that. Tnx!
Cancel
Vote Up 0 Vote Down

Cancel