This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Adding outside ASG's to my ACC...

My ACC is virtualized and i am trying add ASG's from the "outside world" into my ACC.

I can get the ASG's that are on my network (VPN tunnel) into the ACC just fine.

also, for some reason one of our remote locations cannot get to the ASG at my location (inside or outside IP) (this location does not have an ASG), but the that same location can get to any other ASG.

any help would be greatly appreciated!

-J

This thread was automatically locked due to age.

Parents

0 megaposer over 16 years ago

Hi,

I am sorry but I fail to correctly understand your problem. Do you have a remote ASG which is not connected to your local network via VPN and is this ASG not able to be shown in the ACC?

Thanks,
Henning
Cancel
Vote Up 0 Vote Down

Cancel
0 James Shakour over 16 years ago in reply to megaposer

exactly!

-J
Cancel
Vote Up 0 Vote Down

Cancel
0 megaposer over 16 years ago in reply to James Shakour

Then how do you connect from this remote location to your local network? Do you have some kind of DNAT/port forwarding involved? What exactly is your network topology? Do you see some kind of violations in the packet-filter.log of the guarding ASG in your local network?
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 megaposer over 16 years ago in reply to James Shakour

Then how do you connect from this remote location to your local network? Do you have some kind of DNAT/port forwarding involved? What exactly is your network topology? Do you see some kind of violations in the packet-filter.log of the guarding ASG in your local network?
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 James Shakour over 16 years ago in reply to megaposer

yes i have a DNAT setup on my local box that points to the ACC. I do not see anything in logs pointing to my local 425.

I appreciate the help thus far.[:)]

-J
Cancel
Vote Up 0 Vote Down

Cancel