Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 4 replies
  • Subscribers 7 subscribers
  • Views 19975 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos UTM 9.X Ubiquiti Unifi AP Tutorial

fake user

Hello,

I have scoured the web for hours trying to find a simple tutorial on how to add a non-Sophos AP to UTM Home. Unfortunately I'm fruitless.

So far I have:

  • Plugged the AP into my switch which is connected to UTM
  • DHCP is running and it has an automatically assigned an IP
  • Wireless Protection is enabled and configured to run on the Internal network
  • I am viewing the Access Points but there is nothing in pending

 

Please could anyone share their experience with this. Is there something stupid I am missing?

Thank you in advance.



This thread was automatically locked due to age.
Parents
  • 0

    We have two of the Unify AP LR devices on our network - they work great! We are not using them to run a separate network, simply extending our exiting network.

    You need to use the Unify Utility to initially configure the APs (update the firmware, configure the radios and assign static IPs and setup a Vlan if required). Once configured, they just start working!  As another responder mentioned, they cannot be used in the "Wireless Protection" section of the UTM, but if all you want to do is setup one or two APs to extend your network it takes about 5 mins.

    Dave Cline

Reply
  • 0

    We have two of the Unify AP LR devices on our network - they work great! We are not using them to run a separate network, simply extending our exiting network.

    You need to use the Unify Utility to initially configure the APs (update the firmware, configure the radios and assign static IPs and setup a Vlan if required). Once configured, they just start working!  As another responder mentioned, they cannot be used in the "Wireless Protection" section of the UTM, but if all you want to do is setup one or two APs to extend your network it takes about 5 mins.

    Dave Cline

Children
No Data
Unfiltered HTML