Thread Info
  • State Suggested Answer
  • +2 person also asked this people also asked this
  • Locked Locked
  • Replies 15 replies
  • Answers 3 answers
  • Subscribers 7 subscribers
  • Views 34085 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RED15w Access Point not showing up as pending access point

MarkusSonderegger

Hi

We use 8 RED15w  for roadwarriors. We run the RED's in Standard/Unified mode, bridged to the LAN in the same IP Segment.

Users behind the RED can connect to all resources in the LAN Segment, DHCP and DNS are working fine.

But the only thing is, the RED15w will not be recognized as Access Points in Wireless Protection as pending Access Points.

The existing AP55C AP's are working fine.

Wireless Networks (3) are setup with Algorithm AES, one is bridged to LAN and the others are in separate segments.

Any idea why?

Thank you and best regards Markus



This thread was automatically locked due to age.
Parents
  • 0

    Same here.

    I got this already to work.

    But after some testings, the RED15w lost the AP. It switched from active to inactive and i did not find a way to reactivate it.

    So i decided to delete the RED15w in the SG 550 including all interfaces, SSIDs, Rules,... i have configured earlier.

    When i re-add the RED15w, everything works like it used to - except of the wireless part. The RED15w is not in the list of Pending APs.

Reply
  • 0

    Same here.

    I got this already to work.

    But after some testings, the RED15w lost the AP. It switched from active to inactive and i did not find a way to reactivate it.

    So i decided to delete the RED15w in the SG 550 including all interfaces, SSIDs, Rules,... i have configured earlier.

    When i re-add the RED15w, everything works like it used to - except of the wireless part. The RED15w is not in the list of Pending APs.

Children
No Data
Unfiltered HTML