I have looked for documentation on this. I don't see it anywhere on how to set it up on the UTM side or the RED configuration side. Looking for a Standard/Unified Setup. I have a number of other REDs in the field but none of them with VLANs.[:(]
My config is UTM ETH0 with All My VLANs 100 and 501
On my RED it shows connected and with out the VLANs it works fine.
I have the RED connected to a trunk port on my switch to LAN1 with VLANs 100 and 501 defined as TAGGED.
Nothing works!
I am not sure if I need to bridge the ETH0 to the RED Interface then Assign the VLAN Interfaces to BR0. I have tried that but no network connectivity. My DHCP server is a Windows Server not the UTM.
Let me know your thoughts.
This thread was automatically locked due to age.
