I have 2 locations. Location A has one internet connection and location B has 2 internet connections. I currently have a RED tunnel configured between the 2 locations and Location B is current set as the Client, so that if the Primary internet(Cable) go down, the tunnel will attempt the RED connection over the secondary(UVerse). This causes the tunnel to drop and about a minute later, the tunnel come up over the Secondary(UVerse connection).
I would like to make location A as the sever for 2 tunnels(1 to location B UVerse and 1 to location B Comcast). With this I thought I could just create the firewall rules and Static Gateway routes, with different metrics, and this would be simple. When turning on the second route I receive an error - The network '10.0.2.0/24' is already in use by the destination network attribute of the static route object 'to *** Network'.
This is true, but I thought I could have this route in place. Is there another way to do this?
This thread was automatically locked due to age.
