Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 2 subscribers
  • Views 2088 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

PAT on Red

jeanchye_01
hi 

Does port adress translation work for device connected behind RED ?
Here what i want to do (see  pictures)

Red devices will be on transparent / split mode
Same lan will be provided by the routeur dhcp to both lan behind the red devices

Thanks,


This thread was automatically locked due to age.
Parents
  • 0
    If you want all the networks in the same subnet you should create a bridge including 1) the UTM LAN, 2 RED 1 network an 3 RED 2 network.
    Next you will need to create a firewall rule allowing traffic over the bridge.

    Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

Reply
  • 0
    If you want all the networks in the same subnet you should create a bridge including 1) the UTM LAN, 2 RED 1 network an 3 RED 2 network.
    Next you will need to create a firewall rule allowing traffic over the bridge.

    Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

Children
No Data
Unfiltered HTML