This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RED 10 in Standard/Split Mode

My understanding is when the RED is configured in Standard/Split mode that all data on the network goes through the RED to the main UTM, but all "internet traffic" goes out from the RED device via the local remote office's cable modem  or such.  The thing that we do not understand is when the "Internet" goes out at the main office (Sophos SG 135), the RED 10 device at the remote office also goes down and the site can not access the internet.  Even though that sites internet from the ISP is not down?  Why?


This thread was automatically locked due to age.
Parents
  • Like Umph says above, change to Transparent.  Think of it this way: with Standard, the UTM has control, with Transparent, the remote location has control.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • Like Umph says above, change to Transparent.  Think of it this way: with Standard, the UTM has control, with Transparent, the remote location has control.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data