This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Guest wireless behind RED 10

Want to deploy guest wireless access behind a RED 10 with standard/split operation mode. I have a AP50 deployed and have a wireless network for corp use but need a guest network also. Not sure on how to configure for guest access on a separate network to work across the RED.

Thanks for your help.

This thread was automatically locked due to age.

Parents

0 TheHobbit over 9 years ago

Hi,

in Wireless Protection -> Global Settings -> Allowed interfaces you can insert the red10 interface. if the AP50 is plugged in red10 you should Accept the AP50 and you can use it with your guest wifi network configuration (or others)

regards
TheHobbit
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 TheHobbit over 9 years ago

Hi,

in Wireless Protection -> Global Settings -> Allowed interfaces you can insert the red10 interface. if the AP50 is plugged in red10 you should Accept the AP50 and you can use it with your guest wifi network configuration (or others)

regards
TheHobbit
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data