Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 2 subscribers
  • Views 1506 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Polycom VC behind a RED

richarrison
Hi There,

I'm trying to setup a polycom vc unit behind a RED.

I have the following configured:
- additional external ip address assigned to the RED 'interface'
- firewall rules for the polycom (h323, ntp, ping)
- masquerade rule for the polycom
- full nat rule for the polycom

The UTM is an ASG320 with v9.209-8 with RED 50.

With what I have in place it's failing it's first test - ping. What I've found is when the additional IP address is enabled the RED fails over to the other external connection.

Any ideas how I can configure the utm to allow the polycom to receive and make external vc calls? internal are fine.

Cheers


This thread was automatically locked due to age.
Unfiltered HTML