This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

WLAN behind a RED 10

Hey there!

I have a short - hopefully not too stupid - question. ;-)

We do have an ASG 220 in our headquarter, and we have just sent a RED 10 to an external office in order to enable them to work via our IP address.

So, the next thing we would like to do is also making WLAN-devices in the external office, such as tablets, able to go online with our IP.

What needs to be done in order to achieve this? From what I can imagine, we just need to put an access point or WLAN router in one of the RED's LAN-ports and disable the DHCP function on the AP / router. Do you agree, or have I included a mistake somewhere?

Thank you very much in advance

BR
Sebastian

This thread was automatically locked due to age.

0 BAlfson over 10 years ago

Sebastian, if you use UTM Wireless Protection with a Sophos Access Point, and you use a Split mode with the RED, you must add 1.2.3.4 in 'Local networks'. If you use a wireless router, in addition to disabling DHCP, tape over its WAN port and connect it to the RED with one of the LAN ports.

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel