Hi all,
I try to configure the REDs as Bridge to the branchs use the same ip range and work as stay in the HQ, but I read several documents and posts, all said that is possible but I dont found one say that got it.
my internal IP network use 192.168.0.x
I make the bridge betwenn the eth0 (internal) and the RED) its OK.
The RED have an IP 192.168.0.120
RED tunnel is up
I set one firewall rule allowing internal red
but
I cannot ping the RED ip
I cannot ping any hosts behind the RED
Anyone already setup it ?
Some documents that I already use for this.
Putting clients on RED and LAN onto same network behind the Astaro Security Gateway
Sophos RED (Remote Ethernet Device) Technical Training Guide
http://www.sophos.com/en-us/medialibrary/PDFs/documentation/utm9207_manual_eng.pdf?la=en
Many others posts here in the board.
Thank you if some one can help me
This thread was automatically locked due to age.
