This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RED can't access branch VPN

Hi,
   My setup is as follows:

RED10v3---------UTM220-----(IPSec S2S VPN)---UTM120
10.10.0.0/24 ----10.0.0.0/16---------------------------10.5.0.0/24

The problem that I'm having is that I can't communicate from the RED to the 120 network.  I can ping/communicate from the RED to the 220, and from the 220 to the 120.

I've added firewall rules on both the 220 and the 120 to allow any traffic from and to the RED and the 120 networks.

The RED is set up as split tunnel and I have both the 220 and the 120's networks in the split network list.

No matter what, I can't ping from the RED to the 120.  What am I missing?

Thanks,
          Ben

This thread was automatically locked due to age.

0 BAlfson over 10 years ago

You need to add the RED network to the VPN tunnel. Was that it?

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel
0 ButtonPuncher over 10 years ago

Ohhhhh yeah, I should have remembered that you need to define your local/remote networks in there too. Let me give that a shot.
Cancel
Vote Up 0 Vote Down

Cancel