This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RED over UTM to IPSEC Tunnel

Dear all

I have an SG330 with two RED devices and an IP-SEC Tunnel connected.
All clients behind the RED and behind the Tunnel connect easily to the central network at SG330

I now need a connection from a client behind a RED to a Server behind the IPSEC Network and I fail to understand.

UTM SG 330 with an internal network: 172.16.0.0/16
RED with a network: 192.168.50.0/24
IPSEC with a network: 172.20.0.0/16

What do I need to configure?
Network Protection Firwall
Interface&Routing/Static Routing
Network Protection/NAT

Thank you for your help and kind regards, Matthias

This thread was automatically locked due to age.

Parents

0 heggen over 9 years ago

Had the same problem that I couldn't communicate from a Client behind a RED to a client behind a S2S tunnel. Your explanations helped me to solve the problem. Thanks guys.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 heggen over 9 years ago

Had the same problem that I couldn't communicate from a Client behind a RED to a client behind a S2S tunnel. Your explanations helped me to solve the problem. Thanks guys.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data