This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RED over UTM to IPSEC Tunnel

Dear all

I have an SG330 with two RED devices and an IP-SEC Tunnel connected.
All clients behind the RED and behind the Tunnel connect easily to the central network at SG330

I now need a connection from a client behind a RED to a Server behind the IPSEC Network and I fail to understand.

UTM SG 330 with an internal network: 172.16.0.0/16
RED with a network: 192.168.50.0/24
IPSEC with a network: 172.20.0.0/16

What do I need to configure?
Network Protection Firwall
Interface&Routing/Static Routing
Network Protection/NAT

Thank you for your help and kind regards, Matthias

This thread was automatically locked due to age.

Parents

0 twister5800 over 10 years ago

Hi Matthias,

I would try to setup a static route on the IPSEC network router (172.16.20.0/16), telling the router there how to get to the 192.168.50.0/24 network (Which is through the SG330 IP), that should be all, the SG330 should know how to get back :-)

-----

Best regards
Martin

Sophos XGS 2100 @ Home | Sophos v20 Technician
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 twister5800 over 10 years ago

Hi Matthias,

I would try to setup a static route on the IPSEC network router (172.16.20.0/16), telling the router there how to get to the 192.168.50.0/24 network (Which is through the SG330 IP), that should be all, the SG330 should know how to get back :-)

-----

Best regards
Martin

Sophos XGS 2100 @ Home | Sophos v20 Technician
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 mjpmotw over 10 years ago in reply to twister5800

Mmh...

As I want RED ---> SG ---> IPSEC

Do I need to add only a route on the IPSEC partner?
(IPSEC goes SG 330 to another ASG 120, means on the ASG 120).

There is no need to do some routing, policy, firewall on the SG330 that terminates both connections?
Cancel
Vote Up 0 Vote Down

Cancel