Hello,
I'm new here (and kind of a newbie) so please bear with me and forgive any mistakes that I make.
So I'm trying to install a new RED50 device into our existing network (current config is as follows : LAN -> DLink DES-1024D SWITCH -> Cisco 8600 series router > Dlink switch connected to the internet via a fiber optic connection).
The RED50 is currently connected to the first switch (DES-1024D) via the LAN1 port, and to the second switch via the WAN1 port (I also tried connecting the WAN1 port to the Cisco router).
This is what happens when I power the RED50 :
- Power LED is green.
- LAN1 and WAN1 Link LEDs are green.
- LAN1 and WAN1 Activity LEDs are blinking orange.
- The normal messages on the screen start to show up (Starting RED >ID ***.. > Network Setup > Try WAN1 > Try Prov. Server > Network Setup > Try WAN2 > Try Prov. Server then it shuts down and restarts...)
I didn't want to change the Cisco router's configuration before posting (The tech who was here before me did the configuration and he left before giving me any idea about how he configured it).
Any idea about what issue and what might be causing it?
Thanks a lot in advance for any kind of help.
This thread was automatically locked due to age.
