Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 15 replies
  • Subscribers 2 subscribers
  • Views 9144 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RED on an Interface NOT used as default gateway route

bjoern.wekerle
Hello,

we want to use an additional interface for the Red devices. Our default GW is using a different interface, so we setted up the following:

-Policy Gateway Route with source interface: any, Source network: [IPexclusiveREDinterface], Service: any, Destination Network: any, Gateway: [IPnexthopREDinterface]
-RED Setup using the [IPexclusiveREDinterface] as UTM Hostname

The RED10 connects to our UTM. I can ping the Ethernet Interface of the RED..but I can't reach all the Layer 2 devices behind the RED...

We do have some other reds connected over another interface, so right now we want to use two red connecting interfaces. These reds are working properly.


This thread was automatically locked due to age.
Parents
  • 0
    Not sure what you're trying to achieve, is it possible that you post a drawing of what you want?

    Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

Reply
  • 0
    Not sure what you're trying to achieve, is it possible that you post a drawing of what you want?

    Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

Children
No Data
Unfiltered HTML