This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

No traffic between the LAN

Hello,

I just installed my first RED. Everything works (tunnel, etc.) but i have not access to Internet neither to the LAN behind the UTM. I am at the remote destination behind a NAT router in 192.168.0.1 And my LAN behind the RED Is in 10.3.0.1. The IP of the RED is 10.3.1.1. Do I have to add the DNS of the router LAN ?
Thanks

This thread was automatically locked due to age.

Parents

0 elisehamel over 10 years ago

Just to let Know to every body I found out my problem. The DHCP RED Network was on the same subnet than the DHCP Network of the UTM.

I changed the subnet. It worked.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 elisehamel over 10 years ago

Just to let Know to every body I found out my problem. The DHCP RED Network was on the same subnet than the DHCP Network of the UTM.

I changed the subnet. It worked.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data