Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 2 subscribers
  • Views 1956 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Chceck configuration

corsairetc
Hello, today I was set up the RED 10 device with this how to:
Astaro RED (Remote Ethernet Device) Technical Training Guide

In standart/unified mode.
I just wont to ask in Interface settings if I set correct interface type, here is named for standart/unified mode ,, choose Ethernet Standart" but in my UTM 9 is named ,, Ethernet Static or here is the choice to Ethernet DHCP"
I presume the Ethernet Static is simillar to Ethernet Standart.

2. Question is if I can test RED 10 on my Public connection on my astaro I still cant test it on remote location because there is still not activate internet from ISP.

Thank you and best regards.


This thread was automatically locked due to age.
Parents
  • 0
    Hi,

    please check if you have done the following:

    - add RED network under "Webprotection/Global" Allowed Networks
    - add RED network under "Network Protection/Firewall" at the source side of the rule, wich allows "Web surfing" or create a new one.
    - add a NAT Rule under "Network Protection/Firewall" from RED Network -> Uplink Interfaces
  • 0 in reply to Daniels_UTM
    Hi,

    please check if you have done the following:

    - add RED network under "Webprotection/Global" Allowed Networks
    - add RED network under "Network Protection/Firewall" at the source side of the rule, wich allows "Web surfing" or create a new one.
    - add a NAT Rule under "Network Protection/Firewall" from RED Network -> Uplink Interfaces


    I believe that if you enable webprotection for the RED network that it is not necessary to also create a firewall rule for "Web surfing" since the proxy already catches all traffic.
    It may however still be necessary to create a firewall rule allowing HTTPS traffic if HTTPS scanning is disabled in the proxy.

    Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

  • 0 in reply to apijnappels
    Great it works, only what I need to was add the RED network to proxy profiles in web filtering.
Reply Children
No Data
Unfiltered HTML