This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Chceck configuration

Hello, today I was set up the RED 10 device with this how to:
Astaro RED (Remote Ethernet Device) Technical Training Guide

In standart/unified mode.
I just wont to ask in Interface settings if I set correct interface type, here is named for standart/unified mode ,, choose Ethernet Standart" but in my UTM 9 is named ,, Ethernet Static or here is the choice to Ethernet DHCP"
I presume the Ethernet Static is simillar to Ethernet Standart.

2. Question is if I can test RED 10 on my Public connection on my astaro I still cant test it on remote location because there is still not activate internet from ISP.

Thank you and best regards.

This thread was automatically locked due to age.

Parents

0 Daniels_UTM over 10 years ago

Hi,

please check if you have done the following:

- add RED network under "Webprotection/Global" Allowed Networks
- add RED network under "Network Protection/Firewall" at the source side of the rule, wich allows "Web surfing" or create a new one.
- add a NAT Rule under "Network Protection/Firewall" from RED Network -> Uplink Interfaces
Cancel
Vote Up 0 Vote Down

Cancel
0 corsairetc over 10 years ago in reply to Daniels_UTM

Hi thank you, I forget abou it.
I attach screen with setup.
1. Web filtering
2.FW rule
3.Nat rule

What do you think uplink interface the public interface, you mean the masquarade ?
- web_prot.png
- View
- Hide
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 corsairetc over 10 years ago in reply to Daniels_UTM

Hi thank you, I forget abou it.
I attach screen with setup.
1. Web filtering
2.FW rule
3.Nat rule

What do you think uplink interface the public interface, you mean the masquarade ?
- web_prot.png
- View
- Hide
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data