Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 2 subscribers
  • Views 1339 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RED10 Issue (Moved)

S_Schinkel
RED10 problem!!!
My red device red10 v3 connect to the utm an shows up but no tunnel is up.
Reflashing the firmware with rsp tool dont fix the problem. Can I downgrade the red firmware. Where is the firmware located?


This thread was automatically locked due to age.
Parents
  • 0
    The RED is V3 and the UTM has version 9.107-33.
    The RED ist configured as transparent/split and all led lights green.
    The UTM shows the RED as active and the reds1 interface is up.
    I cant connect to the external network behind the RED and reverse.
    With UTM version 9.106-17 everything works fine.
Reply
  • 0
    The RED is V3 and the UTM has version 9.107-33.
    The RED ist configured as transparent/split and all led lights green.
    The UTM shows the RED as active and the reds1 interface is up.
    I cant connect to the external network behind the RED and reverse.
    With UTM version 9.106-17 everything works fine.
Children
No Data
Unfiltered HTML