Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 21 replies
  • Subscribers 2 subscribers
  • Views 18529 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM to UTM using RED Tunnel

3PNTSTech
Hi there, 
I've been looking for a solution to this, however can't find the exact thing I'm looking for. 

So I'm sure this is a easy fix, and I hope someone can help. 

UTM9.1 to UTM9.1 via RED Tunnel

Both have public IPs 

I was able to establish a connection with via a RED tunnel. both are green

However I can't ping either side, or see the other network. 

UTM9 Server - RED2 (has an actual RED device) Setup interface with IP 192.168.33.x
UTM9 Client Setup interface with IP 192.168.100.x

I have tried this:

Configuring Firewall Rules on UTMS = UTMS ANY UTMC & UTMC ANY UTMS
and 
Configure Firewall on UTMC = UTMC ANY UTMS & UTMS ANY UTMC

What am I missing here? 

I read a few threads regarding Bridging the RED interface with the Internal LAN, but I can't seem to do that?   Or it doesn't provide any option to do so. 

Thoughts?


This thread was automatically locked due to age.
Parents
  • 0
    Are you using the interfaces network addresses for both REDs and REDc in your firewall rules?

    Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

Reply
  • 0
    Are you using the interfaces network addresses for both REDs and REDc in your firewall rules?

    Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

Children
No Data
Unfiltered HTML