Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 13 replies
  • Subscribers 2 subscribers
  • Views 5614 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM -> UTM Bridged and routed subnet

apijnappels
Is it possible to create a bridged connection between two UTM's by using the RED capability as well as a normal routed connection?

In one of our sites we have a fiber connection to one of our customers and to be able to work for this customer from another site we should use a bridged connection between the two.
We also would like to have normal routed connection between the two sites.
The clients connected to our customer are already on another subnet as the rest of this site.

Not sure if this would be possible. Anyone that knows the answer?


This thread was automatically locked due to age.
Parents
  • 0
    Is your sites all one big routed network? Ie the customer on fibre can connect to stuff at other sites?

    If so you just need to add the different subnets into the utm to allow the different subnet to connect to the utm
Reply
  • 0
    Is your sites all one big routed network? Ie the customer on fibre can connect to stuff at other sites?

    If so you just need to add the different subnets into the utm to allow the different subnet to connect to the utm
Children
No Data
Unfiltered HTML