Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 20 replies
  • Subscribers 2 subscribers
  • Views 21786 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

tunnel utm -> utm

PieterH
I setup i red-connection between 2 utm 9 devices.
The status tells me that the connection is established but no traffic is go from or to the other network
In the red-log I see these lines:
2013:08:11-14:39:47 fw red_server[10798]: 7543d61167ee40f: PING remote_tx=61 local_rx=62 diff=-1 
2013:08:11-14:39:47 fw red_server[10798]: 7543d61167ee40f: PONG local_tx=61 
I have made firewall-rules to allow traffic between the networks.
I also made Masquerading rules on both sites for the other networks.
What am i doing wrong?


This thread was automatically locked due to age.
Parents
  • 0
    Sven, I'm not sure what you mean.  This sounds like an approach I haven't tried before.

    I've done this with bridging on both sides where the goal was to have a common subnet available on both ends.

    For other connections, I've used either the classic SSL VPN or IPsec.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    Sven, I'm not sure what you mean.  This sounds like an approach I haven't tried before.

    I've done this with bridging on both sides where the goal was to have a common subnet available on both ends.

    For other connections, I've used either the classic SSL VPN or IPsec.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML