Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 20 replies
  • Subscribers 2 subscribers
  • Views 21784 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

tunnel utm -> utm

PieterH
I setup i red-connection between 2 utm 9 devices.
The status tells me that the connection is established but no traffic is go from or to the other network
In the red-log I see these lines:
2013:08:11-14:39:47 fw red_server[10798]: 7543d61167ee40f: PING remote_tx=61 local_rx=62 diff=-1 
2013:08:11-14:39:47 fw red_server[10798]: 7543d61167ee40f: PONG local_tx=61 
I have made firewall-rules to allow traffic between the networks.
I also made Masquerading rules on both sites for the other networks.
What am i doing wrong?


This thread was automatically locked due to age.
Parents
  • 0
    Usually you only need masq rule at one site (the site with your internet access), however I don't really think thats the issue in no ip-traffic.
    You do have different ip-ranges at both sites do you?

    Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

Reply
  • 0
    Usually you only need masq rule at one site (the site with your internet access), however I don't really think thats the issue in no ip-traffic.
    You do have different ip-ranges at both sites do you?

    Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

Children
No Data
Unfiltered HTML